Sony D8 Digital Handycam DCR-TRV420E Operating Instructions Manual page 90

Digital video camera recorder
Hide thumbs Also See for D8 Digital Handycam DCR-TRV420E:
Table of Contents

Advertisement

Changing the menu settings
Icon/item
HiFi SOUND
TBC*
TBC stands for "Time Base Corrector".
DNR*
DNR stands for "Digital Noise Reduction".
AUDIO MIX
NTSC PB
PB MODE
A/V t DV OUT
When you play back tapes recorded in the Hi8/standard 8 system only.
*
Notes on AUDIO MIX
•When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance.
•You can adjust the balance only for tapes recorded in the Digital8
Note on NTSC PB
When you play back a tape on a Multi System TV, select the best mode while viewing the picture on
the TV.
Note on PB MODE
The mode will return to the default setting when:
– you remove the battery pack or power source.
90
– you turn the POWER switch.
Mode
Meaning
z STEREO
To play back a stereo tape or dual sound track tape
with main and sub sound
1
To play back a stereo tape with the left sound or a
dual sound track tape with main sound.
2
To play back a stereo tape with the right sound or a
dual sound track tape with sub sound.
z ON
To correct jitter
OFF
To not correct jitter. Set TBC to OFF when playing
back a tape on which you have dubbed over and
recorded the signal of a TV game or similar machine.
z ON
To reduce picture noise
OFF
To reduce a conspicuous afterimage when the picture
has a lot of movement
–––––
To adjust the balance between the stereo 1 and stereo
2
z ON PAL TV
To playback a tape recorded on your camcorder on a
PAL system TV
NTSC 4.43
To playback a tape recorded in the NTSC colour
system on a TV with the NTSC 4.43 mode
z AUTO
To automatically select the system (Hi8/standard 8
or Digital8
and play back the tape
/
To play back a tape that was recorded in the Hi8/
standard 8 system when your camcorder does not
automatically distinguish the recording system
z OFF
To convert digital video signals into analog video
signals via your camcorder
ON
To convert analog video signals into digital video
signals via your camcorder
"A/V t DV" appears on the LCD screen or in the
viewfinder. (p. 79)
ST1
ST2
) that was used to record on the tape,
system.
POWER
switch
VTR
VTR
VTR
VTR
VTR
VTR
VTR

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

D8 digital handycam dcr-trv520eDcr-trv620e

Table of Contents