Advertisement
There are four configuration screens within the Access Point Web
Configurator: AP Information MIB, AP Control MIB, TCP/IP Settings, and
Change Password. The Home option within each configuration screen will
return you to the main selection menu.
The A A P P I I n n f f o o r r m m a a t t i i o o n n M M I I B B option supplies you with the basic setting
information for your Wireless Access Point.
The AP Control MIB option allows you to modify the DS Channel, the SSID,
and the RTS Threshold. Once any changes are made in this option, you will
not be able to communicate with the Wireless Access Point until you make
the same changes to all of the Wireless Access PC Cards or PCI Adapters in
the wireless network. You can also restore the default settings by clicking
Factory Default.
8
All manuals and user guides at all-guides.com
Click Encryption to change the encryption security settings.
Within the Encryption option, you can modify the WEP and the Key Entry.
There are three levels of encryption available: Disabled, WEP_64, and
WEP_128. If you select WEP_64 or WEP_128, and Passphrase for a Key
Entry, you must then enter a passphrase. This will generate the hex value
to encrypt your data. Each computer that will be connecting to the wireless
network must have this exact information entered. If you select Manual
Entry for Key Entry, you must then manually assign the hex keys for
either 64-Bit Encryption or for 128-Bit Encryption. This method is only
recommended for advanced users or for network compatibility.
When you are finished making any changes, click Apply Changes to save
your settings.
9
Advertisement
