Cancelling Id Mode - Canon VC-C4 Instruction Manual

Cancelling ID Mode

<Example> In this example, the selection made in the previous section of the cameras with ID
number 2 is cancelled. The camera LEDs are as shown below.
Check the LEDs on all the adjacent connected cameras to ensure that all the
cameras are receiving the signals from the wireless controller.
NOTE
BRIGHT ZOOM
T
W
HOME
SET/OK CANCEL
1 2 3
AF
4 5 6
MF
7 8 9
0
ON SCREEN Fn ID MENU
ID1 ID2
Orange Green
1. Press the i button.
The LEDs on all the connected cameras blink orange (at 0.5-second
intervals).
ID1
Blinking orange Blinking orange
To cancel ID mode operation, press the c or i button. The
LEDs on all the ID2 cameras turn green and the LEDs on the other
cameras turn orange.
2. Press the 0 button.
The LEDs on all the cameras turn green as for normal operation.
ID1 ID2
Green Green
This completes ID mode cancellation. All the cameras will now respond
simultaneously to the signals from the wireless controller.
ID2
Green
ID2 ID2
Blinking orange
ID2
Green
ID Mode
ID3
Orange
ID3
Blinking orange
ID3
Green
31