Connecting The Components - Canon VC-C4 Instruction Manual

Using the Wide-angle Converter
The optional Wide-angle Converter WL-37 can be used to provide wide-angle shots (approx.
0.74 the normal focal distance).
Mount the wide-angle converter correctly so that it is level and fitted securely onto the camera.
When mounted correctly, the wide-angle converter should turn roughly 3 times before stopping.
Wide-angle Converter
WARNING
The Wide-angle Converter WL-37 is designed specifically for the VC-C4 and cannot
be used on the VC-C4R. If the converter is used on the VC-C4R, the mount will gradually
loosen and the converter will fall off the camera.
The camera may not operate correctly if a wide-angle converter other than the
WL-37 is used.
NOTE
The permissible range of camera installation angles with the wide-angle
converter mounted on the camera is 15 from the horizontal.

Connecting the Components

AC cable
No S-VIDEO or RS-232C cable is supplied with the camera. Consult your dealer
for information on suitable RS-232C cables for your computer.
MEMO
DC IN 13V S VIDEO OUT VIDEO OUT OUT
RS-232C cable
Pin cable
AC adapter
S-VIDEO cable
(Rear of camera)
To RS-232C-IN
RS232C IN
RS-232C cable
To RS-232C terminal
To VIDEO IN terminal
To S-VIDEO IN terminal
Before You Use the Product
Another
VC-C4/VC-C4R
PC
Monitor
13