Controlling The Camera From The Wireless Controller; Changing The Camera Head Angle (Pan/Tilt/Home Position); Range Of Camera Head Movement - Canon VC-C4 Instruction Manual

Controlling the Camera from the Wireless Controller

While the wireless controller buttons are being used, the LED on the camera blinks green (at
0.1-second intervals) (
Changing the Camera Head Angle
Use the procedures below to change the camera head angle.
BRIGHT ZOOM
HOME
SET/OK CANCEL
1 2
AF
4 5
MF
7 8
0
ON SCREEN Fn ID MENU
Do not attempt to manually change the camera head angle.
If the camera head is accidentally moved, either by hand or by
NOTE
being struck by an object, always press the h button. The
deviation from the position that the camera memorizes will be
corrected and the operation will be back in order.

Range of Camera Head Movement

The figures below show the range of camera head movement from a horizontal position. The
default range of upward movement for the VC-C4 is 30 , but the range can be set to 90
( P.26).
16
P.14).
To move the camera head left and right (pan)
Press the 4 and 6 buttons.
When pointing the remote control in the direction of the camera
T
W
and using it, the image on the monitor moves in the direction of
the arrow on the button pressed, and the camera head moves
in the oppsite direction.
When DIRECTION MIRROR (
head moves in the direction of the arrow on the button pressed.
3
Holding the button down increases the speed of camera head
6
9 movement as shown below.
Low speed
To move the camera head up and down (tilt)
Press the 8 and 5 buttons.
Holding the button down increases the speed of camera head
movement as shown below.
Low speed
To move the camera head to the Home position
Press the h button.
This moves the camera head to the center position at high speed.
30
100
100
30
VC-C4
(pan/tilt/home position)
P.25) is set to ON, the camera
Medium speed High speed
Medium speed High speed
10
170
170
VC-C4R
90