Sony Handycam HDR-CX360E Handbook page 72

A/V Remote Connector
Input
S VIDEO
AUDIO
(Yellow)
Signal flow
HDR-CX360E/CX360VE/PJ10E/PJ30E/PJ30VE
*
HDR-PJ50E/PJ50VE/XR160E
**
 A/V connecting cable (supplied)
 A/V connecting cable with S VIDEO
(sold separately)
By using this cable, higher quality
images can be produced than with an
A/V connecting cable. Connect the white
and red plug (left/right audio) and the S
VIDEO plug (S VIDEO channel) of the
A/V connecting cable with an S VIDEO
cable. If you connect the S VIDEO plug
only, you will hear no sound. The yellow
plug (video) connection is not necessary.
*
**
VIDEO
(Yellow)
(White)
(Red)
1
Insert the recording media in the
recording device.
If your recording device has an input

selector, set it to the input mode.
2
Connect your camcorder to the
recording device (a disc recorder,
etc.) with the A/V connecting
cable  (supplied) or an A/V
connecting cable with S VIDEO
 (sold separately).
Connect your camcorder to the input jacks

of the recording device.
3
Start playback on your
camcorder, and record it on the
recording device.
Refer to the instruction manuals supplied

with your recording device for details.
4
When dubbing is finished, stop
the recording device, and then
your camcorder.

Notes
Since copying is performed via analog data

transfer, the image quality may deteriorate.
You cannot copy images to recorders connected

with an HDMI cable.
To copy date/time information, camera data,

and coordinates (HDR-CX360VE/PJ30VE/
PJ50VE), touch
(Playback Settings)]  [Data Code] 
[
a desired setting 
GB

(MENU)  [Setup] 
.