Batteries/Power Sources - Sony Handycam HDR-CX360E Handbook

The menu settings have been changed
automatically.
While Intelligent Auto is active, some menu

settings related to image quality will be
changed automatically.
The following menu items return to the

default settings when you switch between
movie recording and photo recording and
playback modes.
[ Fader]

[ Self-Timer]

[Tele Macro]

Your camcorder gets warm.
Your camcorder may become warm during

operation. This is not a malfunction.
A rattling noise can be heard when you
shake the camcorder.
If no noise is heard when the camcorder is

turned on and is in the movie/photo recording
mode, the noise is produced by the movement
of the internal lens. This is not a malfunction.
Intelligent Auto is canceled.
The Intelligent Auto setting is canceled if you

change the following settings:
[Smth Slw REC]

[Golf Shot]

[White Balance]

[Spot Meter/Fcs]

[Spot Meter]

[Spot Focus]

[Exposure]

[Focus]

[Low Lux]

[Scene Selection]

[Tele Macro]

[ SteadyShot]

[ SteadyShot]

[Auto Back Light]

[Face Detection]

The supplied Wireless Remote
Commander does not function
(HDR-CX360E/CX360VE/PJ10E/PJ30E/
PJ30VE/PJ50E/PJ50VE).
Set [Remote Ctrl] to [On] (p. 96).

Insert a battery into the battery holder with

the +/– polarities correctly matching the
+/– marks (p. 127).
Remove any obstructions between the

Wireless Remote Commander and the remote
sensor.
Point the remote sensor away from strong light

sources such as direct sunlight or overhead
lighting. Otherwise, the Wireless Remote
Commander may not function properly.
Another DVD device malfunctions when
you use the supplied Wireless Remote
Commander (HDR-CX360E/CX360VE/
PJ10E/PJ30E/PJ30VE/PJ50E/PJ50VE).
Select a commander mode other than DVD 2

for your DVD device, or cover the sensor of
your DVD device with black paper.

Batteries/power sources

The power abruptly turns off.
Use the AC Adaptor.

In the default setting, when about 5 minutes

have elapsed while you do not operate your
camcorder, the camcorder is automatically
turned off (A. Shut Off). Change the setting
of [A. Shut Off] (p. 96), or turn on the power
again.
Charge the battery pack (p. 14).

The CHG (charge) lamp or the /CHG
(flash/charge) lamp does not light while
the battery pack is being charged.
Close the LCD screen (p. 14).

Attach the battery pack to the camcorder

correctly (p. 14).
GB
101