Cleaning And Maintenance - Sable SA-HF033 User Manual

Note:
Do not drag the
Do not rub the folding place.
deflated air mattress
on the ground.
Inflating the Air Mattress
Make sure the extra safety valve closed tightly prior to inflation by firmly pushing the
tab down.
1. Open the cord storage holder, plug into a power source. Turn the knob clockwise to
the INFLATE position. It takes 3 to 5 minutes to inflate.
2. When the airbed is fully inflated, turn the knob counterclockwise to OFF to shut off
the motor. Put the cord back into cord holder.
Deflating the Air Mattress
1. To deflate, make sure nothing is on top of the mattress. Take out the cord and plug
1.5m / 59.1in
2. When done, rotate the knob to OFF, and put the cable back into the cord holder.
3. Open the air valve to let the remaining air out, then roll the bed up for easy storage.
into a power source. Turn the knob counterclockwise to the DEFLATE position.

Cleaning and Maintenance

1. Wipe with a damp cloth, lay dry after cleaning.
2. Remove the sheet from the air mattress when not in use.
3. Use this product in a well-ventilated place and keep it
away from humidity.
03/04