Sound Adjustment; Adjusting The Sound - Sony MHC-GTX88 Operating Instructions Manual

Sound Adjustment

Adjusting the sound

Reinforcing the sound
You can reinforce the bass and create a
more powerful sound.
Press GROOVE repeatedly.
GROOVE ON* t Z-GROOVE ON* t
GROOVE OFF t GROOVE ON t ...
* The volume switches to power mode and the
equalizer curve changes.
Tip
The default setting is "GROOVE ON".
Selecting the preset effect
Press PRESET EQ (or EQ on the
remote) repeatedly to select the
preset effect you want.
Preset effect options
Effect Category
ROCK, POP, Standard music sources
JAZZ, DANCE,
SOUL, TECHNO,
HIP HOP,
REGGAE,
SAMBA,
CLASSICAL
FLAT Original music source
USER EQ 1, User equalizer setting
USER EQ 2, (see "Adjusting the
USER EQ 3 graphic equalizer or
selecting the surround
effect")
To cancel preset effect
Press PRESET EQ (or EQ on the remote)
repeatedly to select "FLAT".
Adjusting the graphic
equalizer or selecting the
surround effect
You can adjust the sound by raising or
lowering the level of specific frequency
band, then store up to three user equalizer
settings in the memory.
1
Press EQ BAND/MEMORY
repeatedly to select a frequency
band or surround effect.
2
Turn OPERATION DIAL to adjust
the level or select the surround
effect you want.
Frequency band
1 2
GROOVE
3
Repeat steps 1 and 2 to adjust
the level of other frequency
bands and surround effect.
4
Press ENTER.
A user equalizer number flashes in the
display.
5
Turn OPERATION DIAL to select
a user equalizer number (1~3)
you want to store the equalizer
setting.
Select "EXIT?" to cancel storing.
6
Press ENTER.
This setting is automatically stored as
the user equalizer setting you selected
in step 5.
The previous setting stored at this
memory location is erased and
replaced by the new setting.
Frequency level
A B
3
ALL DISCS
l
Continued
33 GB