Sony MHC-GTX88 Operating Instructions Manual page 27

Creating your own program
— Program Play
You can make a program of up to 25 steps
in the order you want them to be played
back.
1
Press (or USB on the
USB
remote).
2
When playback is stopped,
press PLAY MODE on the
remote repeatedly until "PGM"
lights up in the display.
3
Press +/– repeatedly until the
folder you want appears in the
display.
4
Press . or > repeatedly
until the track number you want
appears in the display.
Track
number
USB
1 2
MP3 BOOSTER GROOVE
Track name
5
Press ENTER.
The track is programmed.
The programmed step number appears
in the display.
6
To program additional tracks.
To program Repeat steps
Other tracks on 4 and 5
the same folder
Other tracks on 3 to 5
other folders
PGM
A B
3
USB MEMORY
7
Press NX (or N on the
remote).
Program Play starts.
Other operations
To Do this
Cancel Program When playback is
Play stopped, press PLAY
MODE on the remote
repeatedly until "PGM"
disappear from the
display.
Delete the last step Press CLEAR on the
from the program remote when playback is
list stopped.
Note
The program list is cleared when you perform
the erase operation.
Tip
The program you made remains in the system's
memory even after it has been played back.
Press NX (or N on the remote) to play back
the same program again.
Playing repeatedly
— Repeat Play
You can play back all the tracks or a
single track on an USB device repeatedly.
Press REPEAT on the remote
repeatedly during playback until
"REP" or "REP 1" lights up in the
display.
• REP: All the tracks are played back
repeatedly.
• REP 1: A single track is played back
repeatedly until "REP 1" is canceled.
To cancel Repeat Play
Press REPEAT on the remote repeatedly
until both "REP" and "REP 1" disappear
from the display.
27 GB