Using The Self-Timer - Canon PowerShot SD 700 IS Digital Elph User Manual

Ensure that the camera's date/time is set
beforehand (p. 29).
The date stamp cannot be deleted from the image
data once it has been set.

Using the Self-Timer

You can set a 10 sec. (
time and the number of shots (
the shutter button is pressed.
1
Press the
2
Shoot.
When the shutter button is pressed fully, the self-timer will
activate and the self-timer lamp will blink. When using red-
eye reduction, the self-timer lamp will blink and then stay lit
for the last 2 seconds.
To Cancel the Self-Timer
Press the button to display
You can change the self-timer sound (p. 96).
Changing the Self-Timer Countdown Time (
1
(Rec.) Menu
See Menus and Settings (p. 26).
The following occurs with
each option.
- : 2 sec. before the
shutter releases, the self-
timer lamp and sound will
speed up*.
- :The self-timer sound will play when the shutter but-
ton is pressed and the shutter will release 2 sec. later.
* This may differ depending on your My Camera settings (p. 95).
) or 2 sec. (
Custom Timer), for shooting after
button to display
.
[Self-timer]
Shooting Mode
) delay, or a custom delay
, or
or
.
/ )
.
41