Advertisement
3.1
Main body section
3.1.1 Removing the top cover
(See Fig.1)
(1) Remove the eight screws A attaching the top cover on both
sides of the body.
(2) Remove the three screws B on back of the body.
(3) Remove the top cover from behind in the direction of the
arrow while pulling both sides outward.
3.1.2 Removing the front panel assembly
(See Fig.2 and 3)
• Prior to performing the following procedure, remove the top
cover.
(1) Cut off the tie band 1 fixing the harness.
(2) Remove the screw a, and remove the lug wire.
(3) Remove the three screws C attaching the front panel
assembly.
(4) Remove the four screws D attaching the front panel
assembly on bottom of the body. Detach the front panel
assembly toward the front.
(5) Disconnect the harness from the connector CN971,
CN977,
CN983
and
CN985
(see fig.5),
CN973
on the front AV in board and
the front DIGITAL in board (see 2-3.Front panel assembly
section/ fig.2).
3.1.3 Removing the V compo 2 board & tuner unit & compu
link board
(See Fig.2 and 4)
• Prior to performing the following procedure, remove the top
cover.
(1) Disconnect the harness from the connector
V compo 2 board.
Remove the two screws E' attaching the V compo 2 board
to the rear panel.
(2) Disconnect the card wire from the connector
tuner unit.
Remove the two screws E'' attaching the tuner unit to the
rear panel.
(3) Disconnect the harness from the connector
compu link board.
Remove the two screws E''' attaching the compu link board
to the rear panel.
3.1.4 Removing the Y/C separator board
(See Fig.2)
• Prior to performing the following procedure, remove the top
cover.
(1) Cut off the tie band 2 fixing the harness.
(2) Draw out up the Y/C separator board, disconnecting the
connectors
CN481
and
All manuals and user guides at all-guides.com
SECTION 3
DISASSEMBLY
on the system control board
CN373
CN581
CN1
CN301
CN482
on the Y/C separator board.
A
(both sides)
Audio signal
1 board
a
(fixing the
lug wire)
CN201
on
Tie band 3
Y/C separator
board
on the
CN482
CN481
on the
V compo 2 board
on the
D
Top cover
A
(both sides)
Fig.1
Front panel assembly
C
Tie band 1
Tie band 2
Audio 7.1ch
CN581
in board
CN1
Tuner unit
Fig.2
D
Front panel
assembly
Fig.3
B
C
Harness
band
CN301
Compu
link board
(No.22019)1-7
Advertisement
