Table of Contents
Advertisement
3.1
Main body
3.1.1 Removing the front panel assembly
(See Fig.1 to 4)
(1) From the bottom side of main body, insert the screw-driver
to hole of the third gear from hole a of the bottom chassis,
and then turn the gear to clockwise until front panel assem-
bly comes up. (See Fig.1)
(2) Remove the two screws A attaching the front panel assem-
bly. (See Fig.2)
(3) Remove the four screws B attaching the front panel as-
sembly. (See Fig.2)
(4) Disengage the front panel assembly from hook b and re-
move the front panel assembly. (See Fig.2)
(5) Remove the two screws C attaching the front panel assem-
bly. (See Fig.3)
(6) Disconnect the connector wire from connector
the connection board and then take out the front panel as-
sembly. (See Fig.4)
1-8 (No.MA261)
SECTION 3
DISASSEMBLY
CN374
of
A
B
C
Fig.1
(both side)
Fig.2
Fig.3
CN374
Fig.4
a
B
C
Advertisement
Table of Contents
