Advertisement
An
overcurrent
condition
is
monitored
permanently. If the output current to the
loudspeakers exceeds 50A the amplifier will shut
down immediately.
Mains voltage selection / fuse replacement
The following work should only be carried
!
out by a qualified technician in accordance
to highest electrical safety standards. Risk of
electric shock.
Replacing the fuse
The fuse must be replaced by a 10AT type
(5x20mm).
Never attempt to short the fuse
holder. Normally the fuse should never blow – if
it has, it is a sign of a serious fault condition.
Further investigation is needed.
7
Advertisement
