Advertisement
Room temperatures over 30 degrees Celsius
!
and / or extreme humidity should be
avoided. Keep away from heat sources like
radiators,
heating,
ovens
or
similar
appliances dissipating heat. It is important to
maintain an adequate supply of airflow to
prevent overheating.
Place the unit(s) on a solid, flat level surface such
as a shelf or directly on the floor. Virtually, there
are no limitations on where to position your G.F.
HÄNDEL. We suggest positioning the unit(s) so
that the speaker connecting cables remain
short.
First, establish the AC – power connection. The
IEC mains input is located on the rear panel.
Make sure that the AC mains switch is set to (0) =
OFF. Connect the power cord to the IEC mains
input and plug it into your wall outlet or high
quality power strip.
G.F. HÄNDEL offers a balanced input, because a
properly implemented balanced connection
will offer higher sound quality than a single-
ended connection. The amplifier can be driven
by a preamplifier or directly from a line – level
source that has a volume control.
4
Advertisement
