Table of Contents
Advertisement
5.1.3.
Service Modes at a glance
Information necessary for service can be displayed.
Service mode setting:
1. Turn the power off.
2. Press the [5] [9] and [R] button simultaneously for five seconds, then [70 RET] is displayed on FL.
3. Press the [
] button to select until [80 SRV] is displayed on FL.
4. Press the [OK] button.
5. It is displayed on FL as [HELLO-->SERV].: It is shown to have entered the service mode.
6. The command is transmitted by attached remote control.
Method of making clear service mode: Press the power button (power off).
The display of information to each command is as follows.
NOTE:
Do not use it excluding the designated command.
Mode name
Release Items
Item of Service Mode executing is cancelled.
Error Code Display
Last Error Code of U/F held by Timer is dis-
played on FL.
*Details are described in
7.1.1. Self-Diagnosis Functions.
ROM Version Display
The display contents are switched over every
5 seconds.
1. Region code
2. Main firm version
3. Timer firm version
4. Drive firm version
5. ROM correction version
6. BOO2 version
7. BOO3 version
All manuals and user guides at all-guides.com
Item
Description
FL display
If any error history dose not exist,
[F00] is displayed.
18
Key operation
(Remote controller key)
Press[0][0] or [Return] in service
mode.
Press [0] [1] in service mode
Press [0] [2] in service mode
Advertisement
Table of Contents
