Using The Self-Timer - Canon PowerShot SD750 Digital ELPH User Manual

Using the Self-Timer

1.
Press the
(b) to display
• You can also use the touch control dial to make a selection.
• When the shutter button is pressed fully, the self-timer will
activate and the self-timer lamp will blink (when using red-eye
reduction, it will stay lit for the last 2 seconds).
• You can change the delay time and number of shots with the
option (p. 18).
To Cancel: press the
10 sec. Self-Timer: shoots 10 sec. after you press the shutter
button.
2 sec. before the shutter releases, the self-timer lamp and sound
speed up*
2 sec. Self-Timer: shoots 2 sec. after you press the shutter
button.
• The self-timer sound beeps quickly *
button and the shutter releases 2 sec. later.
Custom Timer: you can change the delay time (0–10*
30 sec.) and number of shots (1–3 *
• When [Delay] is set to 2 or more sec., the self-timer sound beeps
quickly 2 sec. before the shutter releases. When [Shots] is set to
more than 1, the self-timer sound only beeps before the first shot.
*1 This may differ depending on your My Camera settings (Advanced Guide p. 110).
*2 Default setting.
The self-timer cannot be used in some shooting modes.
button (a) and use the
, or
button and display
1
.
See the Advanced Guide: Functions Available in Each Shooting Mode (p. 160).
See Selecting a Shooting Mode (p. 12).
or
.
.
b
1
when you press the shutter
2
–10).
button
a
2
, 15, 20,
17