Sony Cyber-shot DSC-S500 Handbook page 82

"---- -- --" is printed on the date-inserted part of the image.
Images that do not have the recording data cannot be printed with the date inserted. Set [Date]
•
to [Off] and print the image again (page 67).
Cannot select the print size.
Consult the printer manufacturer as to whether the printer can provide the desired size.
•
Cannot print the image at the size selected.
If you have changed the paper size after having the USB cable connected, then connect the
•
printer again.
The print setting of the camera differs from that of the printer. Change the setting of either the
•
camera (page 67) or the printer.
Cannot operate the camera after canceling printing.
Wait for a while as the printer is carrying out the cancellation. It may take some time
•
depending on the printer.
Others
Your camera does not work.
Use the type of batteries you can use with this camera (page 88).
•
The battery level is low (The E indicator appears). Install new batteries or charged Nickel-
•
Metal Hydride batteries (not supplied).
The power is on, but the camera does not work.
The built-in microcomputer is not working properly. Remove the batteries, and then, after one
•
minute, insert the batteries and turn on the camera.
Cannot identify an indicator on the screen.
See page 18.
•
The lens gets fogged.
Moisture condensation has occurred. Turn off the camera and leave it for about an hour before
•
using it (page 90).
The camera becomes warm when you use it for a long time.
This is not a malfunction.
•
The lens does not move when you turn off the camera.
The batteries are discharged. Install new batteries or charged Nickel-Metal Hydride batteries
•
or use the AC Adaptor (not supplied).
82