Related Manuals for Bestway HYDRIUM 56575
Summary of Contents for Bestway HYDRIUM 56575
- Page 1 WE SUGGEST NOT TO RETURN THE PRODUCT TO THE STORE QUESTIONS? PROBLEMS? MISSING PARTS? For FAQ, Manuals, Videos Or Spare Parts, Please Visit bestwaycorp.com/support HYDRIUM POOLS OWNER’S MANUAL bestwaycorp.com/support Visit Bestway YouTube channel...
- Page 2 Attention! Before setting up your pool ensure your selected location is completely firm and level. Assemble the pool on the provided ground cloth. NOTE: The liner of the steel wall pool is designed to be smaller than the steel wall for technical reasons. If you find it difficult to assemble the liner, place the liner under the sun for one hour which will make it more pliable.
- Page 3 WARNING - Keep children under supervision in the aquatic environment. No diving. - Removable ladders shall be placed on a horizontal surface. Carefully read, understand, and follow all information in this user manual - Irrespective of materials used for swimming pool construction, before installing and using the swimming pool.
-
Page 4: Part List
PART LIST 56575 56385 Name Material 12’ x 48’’ 15’ x 48’’ Spare Part No. Spare Part No. Upper Joint Protector P6743ASS16 P6743ASS16 Top Platform Coated Steel P6745ASS16 P61233ASS16 M6x11 Bolt Stainless Steel 304 P6746ASS16 P6746ASS16 Top Metal Piece Steel P6747ASS16 P6747ASS16 M6 Nut... - Page 5 Pool Maintenance If you do not adhere to the maintenance guidelines below, your health might be at risk, especially that of your children. Using chemical tablets (not included): NOTE: Chemconnect or Chemical Floater must be used when you perform chemical maintenance with tablets. Your purchased item may not include any of those dispensers, in this case you can purchase it by visiting our website www.bestwaycorp.com or at the nearest pool dealer.
- Page 6 5. We strongly recommend the pool is disassembled during the off season (winter months). Store in a dry location out of children’s reach. If you do not want to dismantle the pool in winter, please observe the following instructions: IMPORTANT: Do not drain all of the pool water. If you do so, the pool may be damaged by strong wind. Drain the water to 10cm below the inlet valve on the pool wall.
- Page 7 1.5 cm...
- Page 9 6 cm NOTE: Before connecting valve to the pool, fill the pool leaving 5 - 6cm of space between the position of the connection valve and water surface. WARNING! Never permanently install the connection valve before the water is within a few centimeters of them because the liner has to be properly taut from the pressure of the water.
- Page 10 Bestway Central & South America Ltda, Salar Ascotan 1282, Parque Enea, Pudahuel, Santiago, Chile Distributed in Australia & New Zealand by Bestway Australia Pty Ltd, Unit 2/98-104 Carnarvon St Silverwater, NSW 2128, Australia Tel: Australia: (+61) 29 0371 388; New Zealand: 0800 142 101 Exported by/Exporté...