Before The First Use; Power Mode; Power Button On/Off - Rowenta X-O 90 Operating Manual

BEFORE THE FIRST USE

EN
Pair your remote control before the first usage. This will take
you approximately 10 seconds and must be done only once.
Take off the plastic tab before the fist use.
BOOST
MAX
HIGH
ECO
If pairing failed within 10 seconds, please switch off your appliance.
Then go back to step 1 and follow the instructions for re-pairing.

POWER BUTTON ON/OFF

To t u r n o n a n d o f f y o u r
appliance, press shor tlu the
Power button.
To start vacuuming, press on
ECO, HIGH or MAX speed on
your remote.
66
1.
Switch on your appliance using the
Power button (picture below).
2.
Press simultaneously and shortly MAX
and PAUSE buttons to enter the pairing
mode -> product LED lights will blink to
confirm pairing mode.
3.
Press PAUSE but ton to confirm the
pair ing -> produc t LED light s will
stop blinking and you will hear the
confirmation beep.
Congratulations! You have successfully
paired your remote control.

POWER MODE

Your appliance has 4 power modes for different tasks. Change
cleaning modes using your remote control buttons and adjust
the power:
BOOST: 5min
Intensive cleaning for ground-in-dirt.
NB: Keep pressing the BOOST button to use this
mode .
BOOST
MAX: 20/40min*
Intensive cleaning and encrusted dust. Ideal
MAX
on all types of carpets.
HIGH: 40/50/90min*
HIGH
For maintenance cleaning. Ideal for all types
ECO of hard floors.
ECO : 1h10/1h30/2h40min*
For lightly soiled floors and delicate surfaces :
shelves, frames, curtains etc.
PAUSE:
Temporary shutdown during use.
The LEDs indicate the
power modes.
I n BO OS T mo d e, all
three green lights will
flash on simultaneously.
*depending on model.