Attaching The Terminal Cover - Dukane DLP 8964WUSS User Manual

Attaching the terminal cover

Claw
Insert the two claws of the Terminal cover into the hole of
Insert the two claws of the Terminal cover into the hole of
NOTE
This is a Class A product. When wiring a signal cable or a communication
cable (for example, a LAN cable) close to this product, it may cause radio interference
in which case the user may be required to take adequate measures.
The Terminal cover cannot be attached depending on the cable you use.
Terminal cover A
When detaching the Terminal cover, push the Hook
in the direction of the arrow and pull it forward.
Claw
When detaching the Terminal cover, push the Hook
in the direction of the arrow and pull it forward.
Hook
Do not hold the terminal cover when
moving the projector.
Hook
Do not hold the terminal cover when
moving the projector.
11