Using The Flash - Canon PowerShot SX100 IS User Manual

Using the Flash

Shooting Mode
1
Raise the flash manually.
2
Press the
1. Use the
the flash mode.
: [Auto]
: [On]
3
When you are not using the
flash, lower the flash until it
closes.
• (flash off) appears in the LCD
monitor.
You are recommended to shoot with the camera attached to a
tripod or other device if the camera shake warning icon
appears.
When the flash recharging begins after shooting, the indicator
blinks orange and the LCD monitor turns off. When recharging
ends, the indicator turns off and the LCD monitor turns on. The
time required for flash recharging will change depending on
usage conditions and remaining battery power.
See Functions Available in Each Shooting Mode (p. 222).
button.
or button to change
Commonly Used Shooting Functions
Cannot be set in
*
65
mode.