Locking the Flash Exposure Setting
(FE Lock)
Shooting Mode
You can lock the flash exposure so that the exposure settings are
correctly set regardless of the composition of your subject.
1
Raise the flash.
2
In
mode, press the
(flash on).
3
Aim the camera at the subject on which you
wish to lock the exposure.
4
Press the shutter button halfway and press the
button.
• The flash will pre-fire and
5
Re-aim the camera to compose the shot as
desired and press the shutter button fully.
To Release the FE Lock:
Operate a button other than the control dial.
The FE lock cannot be used when [Flash Adjust] is set to [Off].
See Functions Available in Each Shooting Mode (p. 222).
button and select
will display.
Various Shooting Methods
109