Canon PowerShot SX100 IS User Manual page 171

"!" displayed on the LCD monitor in red and
shooting automatically stopped.
There is insufficient free
space in the camera's built-
in memory.
Zoom does not operate.
Zoom lever was pressed
while shooting in movie
mode.
Playback
Cannot play back.
You attempted to play back
images shot with another
camera or images edited
with a computer.
File name was changed with
a computer or file location
was changed.
Images cannot be edited.
Some images shot with another camera cannot be edited.
Movies do not play back correctly.
Movies recorded with high recording pixels may momentarily stop
playing if played on slow reading memory cards.
Try the following procedures.
- Format the memory card with a low
level format before shooting (p. 59)
- Lower the recording pixels (p. 82)
- Use a high-speed memory card
(SDC-512MSH, etc.)
Operate the zoom before shooting in
movie mode (p. 60). Note the digital
zoom is available while shooting, but
only in Standard movie mode.
Computer images that cannot be
played back may play back if they are
added to the camera using the
supplied software program
ZoomBrowser EX or ImageBrowser.
See ZoomBrowser EX/
ImageBrowser Software User Guide
(PDF).
Set the file name or location on the
file format/structure of the camera.
Refer to the Software Starter Guide
for details.
169
Troubleshooting