Getting Started; Unpacking - Sony DVP-S9000ES Operating Instructions Manual

Getting
Started
This section describes how to hook up
the SACD/DVD player to a TV (with
audio/video input jacks) and/or an
AV receiver (amplifier). You cannot
connect this player to a TV which
does not have a video input
connector. Be sure to turn off the
power of each component before
making the connections.

Unpacking

Check that you have the following items:
• Audio/video connecting cord (1)
• S video cord (1)
• Power cord (1)
• Remote commander (remote) RMT-D122P (1)
• Size R6 (AA) batteries (2)
Inserting batteries into the remote
You can control the player using the supplied remote.
Insert two Size R6 (AA) batteries by matching the + and –
ends on the batteries to the markings inside the
compartment. When using the remote, point it at the
remote sensor on the player.
z You can control TVs and AV receivers (amplifiers) using the
supplied remote
See page 67.
Notes
• Do not leave the remote in an extremely hot or humid place.
• Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
• Do not expose the remote sensor to direct sunlight or lighting
apparatuses. Doing so may cause a malfunction.
• If you do not use the remote for an extended period of time,
remove the batteries to avoid possible damage from battery
leakage and corrosion.
Connecting the power cord
Connect the supplied power cord to the AC IN terminal of
the player.
9