Sony DVP-S9000ES Operating Instructions Manual page 38

Changing the Sound
Displaying the audio information of the
disc
When you select "AUDIO," the channels being played are
displayed on the screen.
For example, in Dolby Digital format, multiple signals
ranging from monaural to 5.1 channel signals can be
recorded on a DVD. Depending on the DVD, the number
of the recorded channels may be different.
1 2 ( 2 7 )
1 8 ( 3 4 )
C 1 : 3 2 : 5 5
1: ENGLISH
PROGRAM FORMAT
DOLBY DIGITAL 3/2.1
L
LS
AUDIO
Select:
ENTER
* "PCM," "DTS," "DOLBY DIGITAL" or "MPEG" is
displayed. In case of "DOLBY DIGITAL," the channels
in the playing track are displayed by numbers as
follows:
For Dolby Digital 5.1 ch:
Rear component 2
DOLBY DIGITAL 3 / 2 . 1
Front component 2
+ Center component 1
** The letters in the program format display mean the
following:
L: Front (left)
R: Front (right)
C: Center (monaural)
LS: Rear (left)
RS: Rear (right)
S: Rear (monaural) - the rear component of the
Dolby Surround processed stereo signal and the
Dolby Digital Signal.
LFE: LFE (Low Frequency Effect)
38
DVD
Current
audio
format*
C R
Current
LFE playing
program
RS
format**
LFE (Low
Frequency Effect)
component 1
The display examples are as follows:
•PCM (stereo)
1: ENGLISH
PROGRAM FORMAT
PCM 48kHz 24bit
AUDIO
Select:
ENTER
•Dolby Surround
1: ENGLISH
PROGRAM FORMAT
DOLBY DIGITAL 2/0
DOLBY SURROUND
AUDIO
Select:
ENTER
•Dolby Digital 5.1ch
"LFE" is always enclosed in a solid line regardless of the
LFE signal component being output.
1: ENGLISH
PROGRAM FORMAT
DOLBY DIGITAL 3/2.1
L
LS
AUDIO
Select:
ENTER
•MPEG
1: ENGLISH
PROGRAM FORMAT
MPEG
AUDIO
Select:
ENTER
•DTS
"LFE" is always enclosed in a solid line regardless of the
LFE signal component being output.
1: ENGLISH
PROGRAM FORMAT
DTS 3/2.1
L
LS
AUDIO
Select:
ENTER
L C R
S
C R
LFE
RS
C R
LFE
RS