Settings For The Sound (Audio Setup) - Sony DVP-NS900V Operating Instructions Manual

xCD DIRECT
Eliminates the use of unnecessary circuits
when playing CDs. This setting will be
activated when you open or close the disc
tray.
This function affects the output of the
following jacks:
— AUDIO OUT L/R jacks
— LINE 1 (RGB)-TV jack
— 5.1CH OUTPUT jacks
— PHONES jack
OFF
ON
Note
If you select "ON" when playing CD type DTS discs,
the sound will become noisy.
88
Select this when playing CD discs,
including CD type DTS discs.
Eliminates the use of unnecessary
circuits needed to play CDs.
Settings for the Sound
(AUDIO SETUP)
"AUDIO SETUP" allows you to set the
sound according to the playback and
connection conditions.
Select "AUDIO SETUP" in the Setup
Display. For details on using the display, see
"Using the Setup Display" (page 82).
The default settings are underlined.
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO FILTER:
DOWNMIX:
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
DTS:
48kHz/96kHz PCM:
xAUDIO ATT (attenuation)
If the playback sound is distorted, set this
item to "ON." The player reduces the audio
output level.
This function affects the output of the
following jacks:
— AUDIO OUT L/R jacks
— LINE 1 (RGB)-TV jack
— 5.1CH OUTPUT jacks
— PHONES jack
OFF
Turns off the audio attenuation.
Normally, select this position.
ON
Reduces the audio output level so that
no sound distortion occurs.
Select this when the playback sound
from the speakers is distorted.
xAUDIO DRC (Dynamic Range Control)
(DVD VIDEO/DVD-RW only)
Makes the sound clear when the volume is
turned down when playing a DVD that has
the "AUDIO DRC" function. This affects the
output from the following jacks:
— AUDIO OUT L/R jacks
— LINE 1 (RGB)-TV jack
— 5.1CH OUTPUT jacks
— PHONES jack
OFF
STANDARD
SHARP
DOLBY SURROUND
ON
D-PCM
PCM
D-PCM
48kHz/16bit