Sony DVP-NS900V Operating Instructions Manual page 30

Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro
D
Logic) decoder and 3 to 6 speakers
This connection will allow you to enjoy the surround effects of the Dolby Surround (Pro Logic)
decoder on your amplifier (receiver). If you have an AV amplifier (receiver) equipped with a
Dolby Digital, MPEG audio, or DTS decoder, refer to page 26.
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
This connection needs a minimum of 3 speakers (front L and R, and rear (monaural)). The
surround effects are enhanced if 6 speakers (front L and R, centre, rear L and R, and subwoofer)
are used.
If your amplifier (receiver) has L and R audio input jacks only, use
(receiver) has a digital input jack, use
xRecommended surround sound effects using this connection with your
amplifier (receiver)
Dolby Surround (Pro Logic) (page 98)
z
For correct speaker setting location, please refer to the operating instructions of the amplifier (receiver).
Note
SACD audio signals are not output from the digital jack.
30
.
D-2
. If your amplifier
D-1