TCL 32S6S Service Manual page 22

➢
After finish update SW, TV will reboot automatically and please remove USB key.
➢ Remember to perform "Factory menuReset ALL" and "Factory menuReset Shop", and then press RCU
"OK/►" key
Appendix ⑵ "How to upgrade main software using USB"
➢ Copy the MAIN SW BIN image "V8-N563T01-LF1Vxxx.bin" into USB stick (pen drive) root path.
➢ Name "V8-N563T01-LF1Vxxx.bin" as "update.zip", please delete other xxx.pkg files from USB stick.
(Make sure the USB remaining available storage is more than 1GB)
➢ Plug USB stick to the TV.
➢ Power on TV by AC, at the same time press "power on" key for 10s, TV will update SW automatically.
➢ When reflashing is successful, TV should restart automatically (about 4min).
➢ Remember to perform "Factory menuReset ALL" and "Factory menuReset Shop", and then press RCU
"OK/►" key.
➢ Finally, restart the TV.
新建文件夹 (3)Test and Alignment Specification for NT63
Page 15 of 25
Series (v0 01) 170612