Sony DVP-NS300 Operating Instructions Manual page 27

Audio Cord Connection Type
B-2 C-2
D
qa Press ENTER.
DTS is selected.
qs Press X/x to select the item.
Choose the item that matches the audio connection you selected in page 21 to 23 (
through ).
D
Audio Cord Connection Type
B-2 C-2
A D
qd Press ENTER.
Quick Setup is finished. All connections and setup operations are complete.
If your AV amplifier (receiver) has an MPEG audio decoder, set "MPEG" to "MPEG" (page
62).
Note
You can directly start Quick Setup only when you run it for the first time.
To run Quick Setup a second time, select "QUICK" under SETUP in the Control Menu (page 56).
Enjoying the surround sound effects
To enjoy the surround sound effects of this player or your amplifier (receiver), the following
items must be set as described below for the audio connection you selected in page 21 to 23 (
through ). Each of these are the default settings and do not need to be adjusted when you
D
first connect the player. Refer to page 56 for using the Setup Display.
You select
D-PCM
DOLBY DIGITAL (only if the
amplifier/receiver has a Dolby Digital
decoder)
AUDIO SETUP
AUDIO ATT:
AUDIO DRC: STANDARD
DOWNMIX: DOLBY SURROUND
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
DTS:
You select
OFF
ON (only if the amplifier/receiver
has a DTS decoder)
Page
62
62
OFF
ON
D-PCM
PCM
OFF
OFF
ON
Page
63
63
B
B
continued
27