Sony DVP-NS300 Operating Instructions Manual page 23

Connecting to an AV amplifier (receiver) with a digital input jack having a
D
Dolby Digital, MPEG audio or DTS decoder and 6 speakers
This connection will allow you to use the Dolby Digital, MPEG audio or DTS decoder function
of your AV amplifier (receiver). You are not able to enjoy the TVS sound effects of the player.
xRecommended surround sound effects using this connection with your amplifier (receiver)
Dolby Digital (5.1ch) (page 67)
DTS (5.1ch) (page 67)
MPEG audio (5.1ch) (page 67)
z
To enhance the surround sound effects, refer to the operating instructions of the amplifier (receiver) for correct
speaker setting location.
Note
After you have completed the connection, be sure to set "DOLBY DIGITAL" to "DOLBY DIGITAL" (page 26). If your AV
amplifier (receiver) has a DTS decoder, set "DTS" to "ON" (page 27). If your AV amplifier (receiver) has an MPEG audio
decoder, set "MPEG" to "MPEG" (page 63). Otherwise, no sound or a loud noise will come from the speakers.
continued
23