Changing The Name Of A Recorded Programme - Sony RDR-HX910 Operating Instructions Manual

5. Changing the Name of a
Recorded Programme
You can label a DVD, title, or programme by
entering characters. You can enter up to 64
characters for a title or disc name, but the actual
number of characters displayed in the menus such
as the Title List will vary. The steps below explain
how to change the name of the recorded
programme.
Number
1 2
buttons, SET
4 5
7 8
0
TITLE LIST
1
Press TITLE LIST.
2
Select a title, and press ENTER.
The sub-menu appears.
3
Select "Title Name," and press ENTER.
The display for entering characters appears.
4
Press </M/m/, to move the cursor to
the right of the screen and select "A"
(upper-case), "a" (lower-case), or
"Symbol," and press ENTER.
The characters of the selected type are
displayed.
3
6
9
</M/m/,,
ENTER
5
Press </M/m/, to select the character
you want to enter, and press ENTER.
The selected character appears at the top of
the display.
Example: Input Title Name
Input Title Name
1 6
2 Back 7
3 Clear All 8
4 Space 9
5 0
The type of characters will change according
to the language you select in "Easy Setup."
Some languages allow you to enter an accent
mark.
To enter a letter with an accent mark, select an
accent followed by the letter.
Example: Select " ` " and then "a" to enter "à."
To insert a space, select "Space."
6
Repeat steps 4 and 5 to enter the
remaining characters.
Input row
Input Title Name
1 -
2 c Back
3 f Clear All
4 Space
5
To erase a character, move the cursor to the
right of the character at the input row. Select
"Back" and press ENTER.
To insert a character, move the cursor to the
right of the point where you want to insert the
character. Select the character and press
ENTER.
To erase all of the characters, select "Clear
All" and press ENTER.
7
Select "Finish," and press ENTER.
To cancel the setting, select "Cancel."
"A"
"a"
Symbol
Cancel
Finish
6 "A"
7 "a"
8
Symbol
9 Cancel
0 Finish
,continued
33