Table of Contents
Advertisement
Maintenance
For instructions on cleaning the washing machine, please visit the website on the cover of this manual and check the
web manual.
Cleaning
Emergency drain
In case of a power failure, drain the water inside the drum before taking out the laundry.
1.
Power off and unplug the washing machine from the electrical outlet.
2.
Gently press the top area of the filter cover to open.
3.
Put an empty, spacious container around the cover, and stretch the emergency drain tube to the container while
holding the tube cap (A).
4.
Open the tube cap and let water in the emergency drain tube (B) flow into the container.
5.
When done, close the tube cap, and reinsert the tube. Then, close the filter cover.
NOTE
Use a spacious container because the water in the drum may be more than expected.
Debris filter
1.
Turn off the washing machine, and unplug the power cord.
2.
Drain the remaining water inside the drum. (For details, refer to the Emergency drain section.)
3.
Gently press the top area of the filter cover to open.
4.
Turn the debris filter knob to the left, and drain off the remaining water.
5.
Clean the debris filter using a soft brush. Make sure the drain pump propeller inside the filter is unclogged.
6.
Reinsert the debris filter, and turn the filter knob to the right.
AddWash door (applicable models only)
A
20
English
U-PJT_WASHER-AD_SimpleUX_MANUAL_DC68-04197G-01_EN.indd 20
A
1.
Open the AddWash door.
2.
Use a wet cloth to clean the AddWash door.
‐
Do not use cleaning agents.
Discolouration may occur.
‐
Use caution when cleaning the rubber packing and the locking
mechanism (A).
‐
Dust off the door area regularly.
3.
Wipe up and then close the AddWash door until you hear a clicking sound.
B
2020-12-24
1:14:36
Advertisement
Table of Contents
