Advertisement
INSTALLATION INSTRUCTIONS
1.
Remove power from the entire machine.
When you receive the product, the dip switches (ref figure 1) 1, 2, 6, 7 & 8 will be OFF; 3 & 4 will be
ON. This will automatically enable the options as follows:
• Accept 20 & 50 Peso notes.
• Four way accept.
• Ready to talk to host machine.
IMPORTANT NOTICE:
Changing any one of switches ON will override the
above options, and the Note Validator will operate
according to switch settings defined in the chart
below.
(See Figure 2)
2
Set note validator switches to desired settings.
.
DIP SWITCHES (Mexico)
©
CPI 2016
Switch
ON state
20 PESO Disabled
SW 1
50 PESO Disabled
SW 2
100 PESO Disabled
SW 3
200 PESO Disabled
SW 4
500 PESO Disabled
SW 5
Reserved
SW 6
Two Ways
SW 7
SW 8
Service Mode
P/N# 253052002
8
7
6
5
4
3
2
1
OFF state
20 PESO Enabled
50 PESO Enabled
100 PESO Enabled
200 PESO Enabled
500 PESO Enabled
Reserved
Four Ways
To work with a "Host
Machine Controller"
Figure 2
CXB2
Off On
Figure 1
Default
Setting
OFF
OFF
ON
ON
ON
OFF
OFF
OFF
http://www.cranepi.com
Mexico
3
Advertisement
