Step 3: Easy Setup; Connecting To The Network - Sony BDP-S470 Operating Instructions Manual

Step 3: Easy Setup

When turned on for the first time
Wait for a short while before the player
turns on and starts "Easy Setup."
1
Plug the player into the mains.
2
Press [/1 to turn on the player.
3
Turn on the TV, then switch the input
selector on your TV so that the signal
from the player appears on your TV
screen.
4
Perform "Easy Setup."
Follow the on-screen instructions to
make the basic settings using </M/m/
, and ENTER on the remote.
12
to mains
</M/m/,
ENTER
Connecting to the
Network
Wired Setup
Use a LAN cable to connect to the LAN (100)
terminal on the player.
LAN cable
(not supplied)
Broadband ADSL modem/
router Cable modem
To set the network settings
Select "Network Settings," "Internet
Settings," then "Wired Setup" (page 24), and
follow the on-screen instructions to complete
the setup.
USB Wireless Setup
Turn off the player, then connect the USB
Wireless LAN Adapter (UWA-BR100 only
available as of January 2010) to the USB jack
on the front or rear of the player.
b
The USB Wireless LAN Adapter may not be
available in some regions/countries.
LAN cable
(not supplied)
Wireless LAN ADSL modem/
router Cable modem
Internet
USB Wireless
LAN Adapter
Internet