Huawei AR600 Series Quick Start Manual page 5

M4
1.4 N•m
1
a
50 mm-55 mm
90°
c
Scenario 4: Cabinet/Rack Mounting
Before You Start
AR series
(excluding the AR610 sub-series)
Cabinets/racks purchased from other vendors must have enough space for equipment installation.
If the distance between front and rear mounting rails is not within the required range, install guide
rails or a tray in the cabinet/rack to support the chassis. Guide rails or trays are not delivered with
the product and must be purchased separately.
Cabinet/rack mounting is not recommended for Wi-Fi-capable routers.
If routers with the 3G, LTE or 5G function are installed in a cabinet, use indoor remote antennas for
the routers. Install indoor remote antennas on the primary 3G, LTE or 5G interfaces on the routers.
Some router models have specific installation requirements. Refer to the following table for
details about your router model.
AR6140 sub-series
Ensure a distance of 375–454 mm or 507–566 mm between the front and rear mounting brackets.
Leave 1 U between the floating nuts on each front mounting rail, and 1 U between those on the rear rails.
Ensure the lower floating nut on each mounting rail is level with those on the other mounting rails.
AR6280 sub-series/AR6300 sub-series
Chassis is heavy, so it is recommended that you install guide rails (separately purchased) in the cabinet to support
the chassis.
b
3
90°
routers can be installed in a 19-inch standard cabinet/rack.
2
4
4
M6
5 N•m