Huawei AR600 Series Quick Start Manual page 11

The following uses wired access as an example. You can also log in to a Wi-Fi-capable device in
wireless access mode.
The Wi-Fi network SSID is a character string that consists of PnP_ and the last six digits of the
device's ESN, in the PnP_xxxxxx format.
The Wi-Fi password is a character string that consists of AR and the last six digits of the device's
ESN, in the ARxxxxxx format.
Login Procedure
Step 1 Turn on the power switch on the external power supply and log in to the router after the SYS indicator
blinks once every 2 seconds (indicating that the router is running properly).
Step 2 Use a network cable to connect a PC to the management interface marked with the MGMT silkscreen
on the router.
AR1610-X6
PWR
SYS
iNET
0 CPU 1 BMC
EPWR
CTRL
VGA
RST PWR
SS SS
Step 3 Assign the PC with an IP address on the same network segment as the router IP address. The available IP
addresses are in the range from 192.168.1.2 to 192.168.1.254, and the subnet mask is 255.255.255.0.
Step 4 Start the browser, enter the URL https://192.168.1.1 in the address box, and press Enter to access the login
page.
Enter the user name and password, and click Login to access the web page.
Step 5
NOTE
In V300R019C00 and later versions,
admin@huawei.com.
In versions earlier than V300R019C00, the default user name is admin and the default password is
Admin@huawei.
On the web page, you can configure the router. For more information, see the Web-based Configuration
of the product.
BMC MGMT
CPU CON CPU MGMT GE9
GE1 GE3 GE5 GE7
SIC
BMC CON BMC MGMT GE8
GE0 GE2 GE4 GE6
the default user name is admin and the default password is
HDD1
HDD2
GE8 GE9
L/A L/A
Network cable
10
Network port