Cleaning and Storage
Quick cleaning method
1.Half fill the blender with warm and little detergent.
2.Press the 'ON' function and hold for 1-2 seconds and release.
Repeat 3-4 times.
3.Then remove the jar and rinse it under running water.
For thorough cleaning
1.Unscrew the blade assembly from the jar by turning
the bottom of the blade assembly in clockwise
direction. (as Fig.4).
2.Remove the rubber seal from the blade assembly.
3.Wash the blender lid, lid stopper, rubber seal, blade
assembly and blender jar in warm soapy water.
4.Only use a damp, soft sponge with detergent and wipe to clean the
motor base.
Caution:
Take care when cleaning the blades as they are extremely sharp.
Note:
Do not clean any part of the blender in the dishwasher.
Note:
Never immerse the motor base in water.
Storage
1.Coil the power cord around the cord storage at the bottom of the
motor base.
2.Store in a cool and dry place.
6
Fig.4