Page 2
TABLE OF CONTENTS CHC25, CHC30 Included Parts------------------------------ 2 Step by Step Assembly Instructions------------------- 3 - 4 Light Bracket Installation------------------------------------ 5...
Page 3
CHC25 & CHC30 Included Parts rear axle front axle 2 - adjustable shoe assemblies " bottom rail U-bolts Bolt List 2 - standard header shoes " top rail U-bolts " x 6" bolts 1 - reach retainer ring " x 4 "...
Page 4
CHC25, CHC30 Model Step by Step Assembly Instructions STEP 1 : A. Install wheels. (Torque to 180 Lbs.-ft.) B. Bolt reach tube between front & rear axles. Place ring into slot in reach receiver, then insert reach tube. Secure with 5/8" x 4 1/2" bolt &...
Page 5
" Drawpin STEP 3 : Top Rail Bracket A. Pin vertical adjuster bracket to right bushing on top of axle using 5/8" drawpin (single hole toward top). Diagonal Channel Vertical Adjuster Bracket B. Secure diagonal channel to left bushing on top of axle, "...
Page 6
Light Kit Installation (optional) : A. Secure mounting brackets (illustrated below). B. Run wire lead forward on outside of reach tube and along side of tongue, through loop. Secure exposed wire using wire clamps provided. Use nylon straps at front of tongue. (Wire lenth does not need to be altered) Wagon not exactly as pictured.