Kohler K-11344 Installation And Care Manual page 5

Drain
Finished Floor
Drain Pipe
4. Position Two Foot Clips (Without Shroud)
Turn the bath shell over and set it in position on the finished floor. Make sure the drain lines up
with the drain pipe and there is no drain interference with the floor.
Position each locking plate with the hole to the outside of the bath.
Trace around the edges of the two foot clips located at the front of the bath, opposite the overflow.
Lift the bath and turn it upside down on saw horses.
Kohler Co.
Bath
Front
5
Overflow
Locking Plate
with Hole
1207307-2-B