Information for images shot on other cameras may not
display correctly.
Overexposure Warning
In the following cases, overexposed portions of the image
blink.
- When reviewing an image right after shooting in the LCD
monitor (information view) or in the viewfinder (information
view)
- When using the detailed display mode of the Playback
mode
Power Saving Function
This camera is equipped with a power saving function. The power
will shut off in the following circumstances. Turn the camera on
again to restore power.
Shooting Mode
Playback Mode
Connected to a
Printer
* Default setting. This time can be changed.
Please note that when the power is turned off with the
power saving function, small amounts of power are still
consumed.
The power saving function will not activate during a slide
show or while the camera is connected to a computer.
The power saving function settings can be changed (p. 33).
22
Powers down approximately 3 minutes after the
last control is accessed on the camera. The LCD
monitor or viewfinder automatically turns off
*
1 minute
after the last control is accessed even if
[Auto Power Down] is set to [Off] (Press any button
other than the OFF button or change the camera
orientation to turn the LCD monitor or viewfinder
back on).
Powers down approximately 5 minutes after the
last control is accessed on the camera.