Shooting With Fe Lock - Canon PowerShot S5 IS User Manual

Shooting with FE Lock

Shooting Mode
You can obtain the correct exposure regardless of the location of
your subject in the composition.
1
Raise the flash.
2
Press the
When an external flash is attached, refer to the manual for
your flash.
3
Focus on the part of the subject on which
you wish to lock the flash exposure setting.
4
Press the shutter button halfway and press
the ISO button.
The flash will pre-fire and the exposure setting will be
locked.
5
Re-aim the camera to compose the shot as
desired and press the shutter button fully.
To Release the FE Lock:
Press anything except the
You cannot use the FE lock when [Flash Adjust] is set to
[Manual] (p. 93).
86
button and set it to
appears on the LCD monitor (or viewfinder).
, or button.
(flash on).