Shooting Mode
(Basic Guide p. 11-13)
Save Settings (p. 96)
Macro/Super Macro (Basic Guide p. 16)
Low Battery (p. 159)
Flash (Basic Guide p. 14)
(Red) Flash Warning (p. 19)
Auto Rotate (p. 99)
Rec Movie Recording (p. 50)
Spot AE Point Frame (p. 78)
AF Frame (p. 69)
*1 Displays when the shutter button is pressed halfway.
*2 This is not normally displayed. It appears when remaining available
internal memory (buffer) is half or less during movie recording (when the
buffer warning indicates full, shooting or recording may be stopped).
*3 "0" appears in red when no more recording space is available for either
still images at the current number of recordable images, or movies.
When both recording capacities are full, the "Memory card full" message
appears.
The "Raise the flash" message,
or
(flash warning) icon blinks red on the LCD monitor (or
viewfinder) in low light conditions while the camera is
preparing to shoot. Use one of the following shooting
methods.
- Set the IS mode to any setting other than [Off] (p. 30)
- Raise the ISO speed (p. 80)
- Set the Auto ISO Shift to [On] (p. 81)
- Raise the flash to enable automatic or normal firing
- Fix the camera to a tripod
(p. 57)
(p. 50)
ISO Speed (p. 80)
Drive Mode (p. 46, Basic Guide p. 18)
(camera shake warning),
19