SpaceraiL LEVEL 1 Manual page 10

C
CONNECT RAILS J, B, AND H
Use the following illustrations and pictures as references for attaching the Rails to the structure:
A
STEP 4
A
Step 4: Connect both J Rail sections between the back top corner of Shaft A and the back top corner of Shaft E.
Step 5: Connect both H Rail sections between the exit of the Elevator and the front top corner of Shaft A.
Step 6: Connect both B Rail sections between the front top corner of Shaft E and the single side of the Split.
Page 10
STEP 4
(J Rail)
STEP 5
(H Rail)
(J Rail)
D
B
C
STEP 5
(H Rail)
STEP 6
(B Rail)
STEP 6
(B Rail)
Spacerails, LLC. All rights reserved. Spacerails.com
E
E