Netis WF2411I Quick Installation Manual page 51

Appendix A: Wireless Power Control
(For WF2522, WF2533)
WF2522 and WF2533 are both wireless high power routers. In default, they work in
normal power mode. You may change it into high power mode to improve the signal
strength.
Before you change the settings, please check the color of the Turbo LED on your router.
Blue — Normal Power Mode
Red — High Power Mode
There're two methods to change the wireless power for your router.
Method 1: Through Turbo Button (Particularly recommended)
Press the Turbo Button, then the Turbo LED color will change from blue to red. Now
the router will work in the high power mode with perfect wireless performance in
penetrating walls and eliminating the Wi-Fi dead zones.
Method 2: Through Web Management Page
Enhanced
1) In "Quick Setup" > "Wireless Signal" page, select "Enhanced" as the Signal Strength.
2) Click on "Save" to make your settings take effect.
Now the router will work in the high power mode with perfect wireless performance in
penetrating walls and eliminating the Wi-Fi dead zones.
Note: The Quick Setup is just for the default wireless mode (Access Point). For the
other modes (WISP, Repeater, AP+WDS, WDS, Client), you can click on
> "Wireless" > "Signal Strength" to change the strength mode, then "Save" it.
Turbo LED
Wireless Signal
Signal Strength: Normal Enhanced
49