Technical Data - AEG IAE84851FB User Manual

Problem
and a number come on.
You can hear a constant beep
noise.
Cookware heats up longer than 5
min.
11.2 If you cannot find a solution...
If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre. Give the data
from the rating plate. Make sure, you
operated the hob correctly. If not the

12. TECHNICAL DATA

12.1 Rating plate
Model IAE84851FB
Typ 62 D4A 05 CA
Induction 7.35 kW
Ser.Nr. .................
AEG
12.2 Software Licences
The software included in the hob contains
copyrighted software that is licensed under
the BSD, fontconfig, FTL, GPL-2.0,
LGPL-2.0, LGPL-2.1, libJpeg, zLib/ libpng,
MIT, OpenSSL / SSLEAY ISC, Apache 2.0
and others.
Possible cause
There is an error in the hob.
The electrical connection is incor‐
rect.
The bottom of the cookware is not
induction compatible.
servicing by a service technician or dealer
will not be free of charge, also during the
warranty period. The information about
guarantee period and Authorised Service
Centres are in the guarantee booklet.
PNC 949 597 566 01
220 - 240 V / 400 V 2N 50 - 60 Hz
Made in: Germany
7.35 kW
Check the full copy of the licence in: Menu >
Settings > Service > License.
You can download the source code of the
open source software by following the
hyperlink present in the web product page.
Remedy
Deactivate the hob and activate it
again after 30 seconds. If
on again, disconnect the hob from
the electrical supply. After 30 sec‐
onds, connect the hob again. If the
problem continues, speak to an Au‐
thorised Service Centre.
Disconnect the hob from the electri‐
cal supply. Ask a qualified electri‐
cian to check the installation.
Use cookware with correct (flat,
magnetic) bottom. Refer to "Hints
and tips".
ENGLISH
comes
23