Tips And Advice For Installation - SOMFY Oximo 40 Solar io Manual

EN
Readjusting the lower end limit
1) Press the Down button to bring the motorised product to the
end limit to be readjusted.
2) Press the Up and Down buttons at the same time until the
motorised product moves up and down.
3) Press the Up or Down button to move the motorised product
to the new desired position.
4) To confirm the new end limit, press the my button until the
motorised product moves up and down.
2.3.7. Modifying the direction of rotation
1) Position the motorised product at the mid-height position.
2) Press the Up and Down buttons at the same time until the
motorised product moves up and down.
3) Press the my button on the control point until the motorised
product moves up and down: The direction of rotation has been
modified.
4) Press the Up button to check the direction of rotation.

2.4. TIPS AND ADVICE FOR INSTALLATION

2.4.1. Questions about the product?
Observations
The motorised product
does not work.
The motorised product
does not respond to
the wake-up com-
mand.
8
Possible causes
The wiring is incorrect.
The battery is discharged.
The control point battery is low.
The control point is not compatible.
The control point used has not been pro-
grammed into the drive.
The motorised product is not set.
1)
3)
1)
3)
Check the wiring and modify it if neces-
sary.
See 3.5.3. and refer to the battery
instructions.
Check the battery and replace it as
required.
Check the compatibility and replace the
control point if necessary.
Use a programmed control point or
program this control point.
Commission the motorised product (see
2.3.).
Copyright 2021 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
©
Oximo 40 Solar io
2)
4)
2)
4)
Solutions