Table of Contents
Advertisement
42
Prodigi
4. Press [
or
Active and press [ ] to select.
5. The
display
<Subscriber alias or ID> and LED indicator
lights red.
6. If successful, a tone sounds and the
display shows Radio Active successfully.
If failed, a tone sounds and the display
shows Radio Active failed.
Note: Do not press the [
to the previous Menu until the operation is
complete.
Scan
Scan lists are created and assigned to
individual channels / groups. The radio scans
for voice activity by cycling through the
channel/group sequence specified in the
scan list for the current channel / group. Your
radio can support up to 250 scan lists, with
a maximum of 16 members in a list. Each
scan list supports a mixture of both analog
and digital entries. You can add, delete, or
RDR2000 Series Professional Digital Two-Way Radio Instruction Manual
TM
] to navigate to Radio
shows
Radio
Active:
] button to return
Copyright © 2016 RCA Communications Systems
prioritize channels by editing the scan lists.
Viewing an Entry in the Scan List
(RDR2550
/RDR2600
only)
TM
TM
1. Use the Channel Selector Knob to select a
channel programmed with a scan list.
2. Press [
] to access the menu.
3. Press [
or
] to navigate to Scan and
press [ ] to select.
4. Press [
or
] to navigate to View List
and press [ ] to select.
5. Use [
or
] to view the members on
the scan list.
Note: If set as priority, the Priority icon appears
left of the member's alias, indicate whether
the member is on a Priority 1 or Priority 2
channel list. You cannot have multiple Priority
1 or Priority 2 channels in a scan list. There is
no Priority icon if priority is set to None.
Scan Instructions and Methods
When a scan is initiated, your radio cycles
through the programmed scan list for the
current channel looking for voice activity. The
Advertisement
Table of Contents
