Table of Contents
Advertisement
28
Prodigi
7. Press the [
radio is waiting for acknowledgement, the
radio terminates all retries and exits Radio
Check mode.
Remote Monitor
Use the Remote Monitor feature to turn on the
microphone of a target radio (subscriber alias
or IDs only). No audible or visual indication
is given to the target radio. You can use this
feature to monitor, remotely, any audible
activity surrounding the target radio. Note:
Your radio must be programmed by your RCA
Communications Systems dealer to allow you
to use the Remote Monitor feature.
Initiating Remote Monitor
Use the programmed Remote Monitor button.
1. Press [
] to access the menu.
2. Press [
or
Contacts and press the [ ] to select.
3. Press [
or
subscriber alias or ID and press [ ] button
RDR2000 Series Professional Digital Two-Way Radio Instruction Manual
TM
] button is pressed while the
(RDR2550
/RDR2600
only)
TM
TM
] button to navigate to
] button to the required
Copyright © 2016 RCA Communications Systems
to select Or press [
Manual Dial, then press [ ] twice. Input
subscriber alias or ID and press [ ] button.
4. Press [
or
] button to Remote
Monitor and press [ ] button.
5. The screen will display remote monitor:
<Subscriber alias or ID>, indicating that
Remote Monitor is in progress. The LED
blinks red.
6. The
display
shows
Successful OR The display shows Remote
Monitor Failed.
7. If successful, the radio will start receiving
audio from the monitored radio for a
programmed duration. Once the timer
expires the LED turns off.
Contacts Settings
(RDR2550
Contacts provide "address-book" capabilities on
your radio. Each entry corresponds to an alias or
ID that you can use to initiate a call. Additionally
each entry, depending on context, associates
or
] button to
Remote
Monitor
/RDR2600
only)
TM
TM
Advertisement
Table of Contents
