Using Conversion Lenses (Sold Separately) - Canon PowerShot S3 IS Advanced User's Manual

Using Conversion Lenses
(Sold Separately)
When attaching the Wide Converter WC-DC58A, Tele-converter
TC-DC58B, and Close-up Lens 500D (58 mm) (each sold separately)
you also need the Conversion Lens Adaptor LA-DC58E (included
with the separately sold Lens Adaptor/Hood Kit LAH-DC20).
When attaching the wide converter, tele-converter or close-up
lens, be sure to screw it on securely. If they come loose, they
may fall from the lens adapter, posing risk of injury from
shattered glass.
Never look into the sun or into strong light through the wide
converter, tele-converter or close-up lens as this can result in
blindness or impairment of vision.
If the built-in flash is used with the lens hood attached, the
outer edges of shot images (especially the lower right) may be
darkened.
When using the wide converter, set the camera to the
maximum wide angle.
When using the tele-converter, set the camera near the
maximum telephoto. At other zoom settings, the image will
appear as if its corners have been cut off.
Wide Converter WC-DC58A
Use this converter for taking wide-angle shots. The wide converter
changes the focal length of the camera body's lens by a factor of
approximately 0.75x (the thread diameter is 58 mm).
Tele-converter TC-DC58B
This lens is used for taking telephoto shots. The lens changes the
focal length of the camera body's lens by a factor of approximately
1.5x. (the thread diameter is 58 mm).
It is not possible to attach a lens hood or filter to the wide
converter or tele-converter.
140